The THS/3F metal detector provides excellent results on multi-product lines, where the individual products have very different conductivity characteristics. Under these circumstances, THS/3F allows maximum sensitivity for detection of contaminating metals, including ferrous, non-ferrous and stainless steel.
The automatic frequency selection function allows the THS/3F to choose the optimum frequency for the product in transit during the Autolearn phase.
The automatic tracking function eliminates any further variations due to the product effect. The wide pass band of the THS/3F detector allows operation at maximum sensitivity at both slow and fast speeds.
Features
- Very high sensitivity
Sensitive to all magnetic and non-magnetic metals, including stainless steel.
- Multi-frequency technology
Allows maximum sensitivity while compensating for product effect variations.
- Full compliance with HACCP criteria
- Easy to use
250 product data memories, selectable by local programming, bar code reader or network software.
- High immunity to environmental interference
Digital analysis of the signal allows user to achieve extremely high sensitivity, immunity to interference, and operational stability.
- Automatic learning & tracking of product effect
Automatically learns optimum frequency for each product during set-up, and then tracks and reacts to product effect variations during production.
- Easy to clean
AISI 316L stainless steel construction to IP69 protection level.
- Requires minimal installation space